TY  - JOUR
AU  - Kari, Aleksandar
AU  - Jeremić, Olivera
AU  - Milinović, Momčilo
AU  - Jerković, Damir
AU  - Marković, Miloš
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5938
AB  - Model considered estimations of isolated shooting errors initiated by barrel
jumping after each particular bullet as the research of particular characteristic important
for gun mounting on the mobile platforms. Sequential influences of barrel disturbances
are included in the initial ballistics derivations independent of vehicle turret and
undercarriage. Expected disturbance magnitudes are analyzed during and beyond
shooting for the particular bullet in the ripple. Shooting ripple errors are analyzed
according to the angular disturbances transposed to the projectile initial ballistic
elements. Rate of barrel impeachments during firing is taken as the element of projectile
spin disturbance. Barrel system with appropriate recoil equipment is taken as the rigid
body model in the first approximation. Behaviour of 40 mm automatic gun as the
possible concept aimed at the shooting with small elevation angles, as mounted on the
mobile combat platforms was tested. Ballistic testing of real projectiles on the proving ground is used as reference to
selected gun particular errors. Further extended research was directed to the system’s
acceptable accuracy and stability in the cases of gun mounting on the Armour Personal
Carrier (APC).
PB  - Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
T2  - Problems of Mechatronics. Armament, Aviation, Safety Engineering
T1  - Shooting Errors Simulations Initiated by Barrel Jumping of 40 mm Turret Guns
EP  - 32
IS  - 4
SP  - 21
VL  - 5
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5938
ER  - 

@article{
author = "Kari, Aleksandar and Jeremić, Olivera and Milinović, Momčilo and Jerković, Damir and Marković, Miloš",
year = "2014",
abstract = "Model considered estimations of isolated shooting errors initiated by barrel
jumping after each particular bullet as the research of particular characteristic important
for gun mounting on the mobile platforms. Sequential influences of barrel disturbances
are included in the initial ballistics derivations independent of vehicle turret and
undercarriage. Expected disturbance magnitudes are analyzed during and beyond
shooting for the particular bullet in the ripple. Shooting ripple errors are analyzed
according to the angular disturbances transposed to the projectile initial ballistic
elements. Rate of barrel impeachments during firing is taken as the element of projectile
spin disturbance. Barrel system with appropriate recoil equipment is taken as the rigid
body model in the first approximation. Behaviour of 40 mm automatic gun as the
possible concept aimed at the shooting with small elevation angles, as mounted on the
mobile combat platforms was tested. Ballistic testing of real projectiles on the proving ground is used as reference to
selected gun particular errors. Further extended research was directed to the system’s
acceptable accuracy and stability in the cases of gun mounting on the Armour Personal
Carrier (APC).",
publisher = "Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego",
journal = "Problems of Mechatronics. Armament, Aviation, Safety Engineering",
title = "Shooting Errors Simulations Initiated by Barrel Jumping of 40 mm Turret Guns",
pages = "32-21",
number = "4",
volume = "5",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5938"
}

Kari, A., Jeremić, O., Milinović, M., Jerković, D.,& Marković, M.. (2014). Shooting Errors Simulations Initiated by Barrel Jumping of 40 mm Turret Guns. in Problems of Mechatronics. Armament, Aviation, Safety Engineering
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego., 5(4), 21-32.
https://hdl.handle.net/21.15107/rcub_machinery_5938

Kari A, Jeremić O, Milinović M, Jerković D, Marković M. Shooting Errors Simulations Initiated by Barrel Jumping of 40 mm Turret Guns. in Problems of Mechatronics. Armament, Aviation, Safety Engineering. 2014;5(4):21-32.
https://hdl.handle.net/21.15107/rcub_machinery_5938 .

Kari, Aleksandar, Jeremić, Olivera, Milinović, Momčilo, Jerković, Damir, Marković, Miloš, "Shooting Errors Simulations Initiated by Barrel Jumping of 40 mm Turret Guns" in Problems of Mechatronics. Armament, Aviation, Safety Engineering, 5, no. 4 (2014):21-32,
https://hdl.handle.net/21.15107/rcub_machinery_5938 .

TY  - CONF
AU  - Milinović, Momčilo
AU  - Jeremić, Olivera
AU  - Kari, Aleksandar
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1374
AB  - Serial and parallel combination of wire rope absorbers junctions provide better absorbing of shock forces and external impulses. This paper considers relations of deviation caused by nonlinearities and hysteretic behavior as consequence of absorbing energy dissipation. Main experimental parameters represented differences of mentioned junctions and are estimated based on experimental static tests realized in this paper. Attempt of comparison with ideal elastic model is performed.
PB  - Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad
C3  - Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
T1  - Experimental test of individual, serial and parallel combined wire rope absorbers on deviation of hysteretic behavior
EP  - 388
SP  - 385
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1374
ER  - 

@conference{
author = "Milinović, Momčilo and Jeremić, Olivera and Kari, Aleksandar",
year = "2012",
abstract = "Serial and parallel combination of wire rope absorbers junctions provide better absorbing of shock forces and external impulses. This paper considers relations of deviation caused by nonlinearities and hysteretic behavior as consequence of absorbing energy dissipation. Main experimental parameters represented differences of mentioned junctions and are estimated based on experimental static tests realized in this paper. Attempt of comparison with ideal elastic model is performed.",
publisher = "Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad",
journal = "Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012",
title = "Experimental test of individual, serial and parallel combined wire rope absorbers on deviation of hysteretic behavior",
pages = "388-385",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1374"
}

Milinović, M., Jeremić, O.,& Kari, A.. (2012). Experimental test of individual, serial and parallel combined wire rope absorbers on deviation of hysteretic behavior. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad., 385-388.
https://hdl.handle.net/21.15107/rcub_machinery_1374

Milinović M, Jeremić O, Kari A. Experimental test of individual, serial and parallel combined wire rope absorbers on deviation of hysteretic behavior. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012. 2012;:385-388.
https://hdl.handle.net/21.15107/rcub_machinery_1374 .

Milinović, Momčilo, Jeremić, Olivera, Kari, Aleksandar, "Experimental test of individual, serial and parallel combined wire rope absorbers on deviation of hysteretic behavior" in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012 (2012):385-388,
https://hdl.handle.net/21.15107/rcub_machinery_1374 .

TY  - CONF
AU  - Milinović, Momčilo
AU  - Jeremić, Olivera
AU  - Kari, Aleksandar
PY  - 2010
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1042
PB  - Wroclaw University of Technology
C3  - 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2010
T1  - Ring wire absorber experimental modelling under the shock impulse
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1042
ER  - 

@conference{
author = "Milinović, Momčilo and Jeremić, Olivera and Kari, Aleksandar",
year = "2010",
publisher = "Wroclaw University of Technology",
journal = "27th Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2010",
title = "Ring wire absorber experimental modelling under the shock impulse",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1042"
}

Milinović, M., Jeremić, O.,& Kari, A.. (2010). Ring wire absorber experimental modelling under the shock impulse. in 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2010
Wroclaw University of Technology..
https://hdl.handle.net/21.15107/rcub_machinery_1042

Milinović M, Jeremić O, Kari A. Ring wire absorber experimental modelling under the shock impulse. in 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2010. 2010;.
https://hdl.handle.net/21.15107/rcub_machinery_1042 .

Milinović, Momčilo, Jeremić, Olivera, Kari, Aleksandar, "Ring wire absorber experimental modelling under the shock impulse" in 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2010 (2010),
https://hdl.handle.net/21.15107/rcub_machinery_1042 .