TY  - JOUR
AU  - Omić, Snežana
AU  - Spasojević Brkić, Vesna
AU  - Golubović, Tamara
AU  - Brkić, Aleksandar
AU  - Klarin, Milivoj
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2600
AB  - BACKGROUND: There are recent studies using new industrial workers' anthropometric data in different countries, but for Serbia such data are not available. OBJECTIVE: This study is the first anthropometric study of Serbian metal industry workers in the country, whose labor force is increasingly employed both on local and international markets. The metal industry is one of Serbia's most important economic sectors. METHODS: To this end, we collected the basic static anthropometric dimensions of 122 industrial workers and used principal components analysis (PCA) to obtain multivariate anthropometric models. To confirm the results, the dimensions of an additional 50 workers were collected. The PCA methodology was also compared with the percentile method. RESULTS: Comparing both data samples, we found that 96% of the participants are within the tolerance ellipsoid. According to this study, multivariate modeling covers a larger extent of the intended population proportion compared to percentiles. CONCLUSIONS: The results of this research are useful for the designers of metal industry workstations. This information can be used in dimensioning the workplace, thus increasing job satisfaction, reducing the risk of injuries and fatalities, and consequently increasing productivity and safety.
PB  - IOS Press, Amsterdam
T2  - Work-A Journal of Prevention Assessment & Rehabilitation
T1  - An anthropometric study of Serbian metal industry workers
EP  - 265
IS  - 2
SP  - 257
VL  - 56
DO  - 10.3233/WOR-172482
ER  - 

@article{
author = "Omić, Snežana and Spasojević Brkić, Vesna and Golubović, Tamara and Brkić, Aleksandar and Klarin, Milivoj",
year = "2017",
abstract = "BACKGROUND: There are recent studies using new industrial workers' anthropometric data in different countries, but for Serbia such data are not available. OBJECTIVE: This study is the first anthropometric study of Serbian metal industry workers in the country, whose labor force is increasingly employed both on local and international markets. The metal industry is one of Serbia's most important economic sectors. METHODS: To this end, we collected the basic static anthropometric dimensions of 122 industrial workers and used principal components analysis (PCA) to obtain multivariate anthropometric models. To confirm the results, the dimensions of an additional 50 workers were collected. The PCA methodology was also compared with the percentile method. RESULTS: Comparing both data samples, we found that 96% of the participants are within the tolerance ellipsoid. According to this study, multivariate modeling covers a larger extent of the intended population proportion compared to percentiles. CONCLUSIONS: The results of this research are useful for the designers of metal industry workstations. This information can be used in dimensioning the workplace, thus increasing job satisfaction, reducing the risk of injuries and fatalities, and consequently increasing productivity and safety.",
publisher = "IOS Press, Amsterdam",
journal = "Work-A Journal of Prevention Assessment & Rehabilitation",
title = "An anthropometric study of Serbian metal industry workers",
pages = "265-257",
number = "2",
volume = "56",
doi = "10.3233/WOR-172482"
}

Omić, S., Spasojević Brkić, V., Golubović, T., Brkić, A.,& Klarin, M.. (2017). An anthropometric study of Serbian metal industry workers. in Work-A Journal of Prevention Assessment & Rehabilitation
IOS Press, Amsterdam., 56(2), 257-265.
https://doi.org/10.3233/WOR-172482

Omić S, Spasojević Brkić V, Golubović T, Brkić A, Klarin M. An anthropometric study of Serbian metal industry workers. in Work-A Journal of Prevention Assessment & Rehabilitation. 2017;56(2):257-265.
doi:10.3233/WOR-172482 .

Omić, Snežana, Spasojević Brkić, Vesna, Golubović, Tamara, Brkić, Aleksandar, Klarin, Milivoj, "An anthropometric study of Serbian metal industry workers" in Work-A Journal of Prevention Assessment & Rehabilitation, 56, no. 2 (2017):257-265,
https://doi.org/10.3233/WOR-172482 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Veljković, Zorica
AU  - Golubović, Tamara
AU  - Omić, Snežana
AU  - Brkić, Aleksandar
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1830
AB  - Export of products and services on EU market can bring great benefits, but also sets requirements to companies which are not easy to meet. Metal processing industry today is the main exporter in Bosnia and Herzegovina (BIH). However value of import significantly exceeds value of the export. Therefore, there is a need to increase export to EU market. The aim of this paper is an empirical examination of the export possibilities to EU market, conducted on a sample of 24 metal complex companies in BIH. Obtained results indicate that adequate marketing strategy is a minor influential factor for export to EU market. Also the research shows that a significant number of companies is not familiar with new approach directives, as well as with procedures for conformity assessment. Most of the surveyed companies have an opinion that there is not enough number of adequate laboratories and institutions for export assistance. Also, the lack of capital for export financing in the companies as export barrier is significant. This topic should be further researched, as it is very important for companies' growth and development in BIH.
PB  - Univerzitet u Novom Sadu - Tehnički fakultet Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - Bosnia and Herzegovina's metalworking industry companies barriers to export to EU market
EP  - 84
IS  - 2
SP  - 78
VL  - 4
DO  - 10.5937/jemc1402078S
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Veljković, Zorica and Golubović, Tamara and Omić, Snežana and Brkić, Aleksandar",
year = "2014",
abstract = "Export of products and services on EU market can bring great benefits, but also sets requirements to companies which are not easy to meet. Metal processing industry today is the main exporter in Bosnia and Herzegovina (BIH). However value of import significantly exceeds value of the export. Therefore, there is a need to increase export to EU market. The aim of this paper is an empirical examination of the export possibilities to EU market, conducted on a sample of 24 metal complex companies in BIH. Obtained results indicate that adequate marketing strategy is a minor influential factor for export to EU market. Also the research shows that a significant number of companies is not familiar with new approach directives, as well as with procedures for conformity assessment. Most of the surveyed companies have an opinion that there is not enough number of adequate laboratories and institutions for export assistance. Also, the lack of capital for export financing in the companies as export barrier is significant. This topic should be further researched, as it is very important for companies' growth and development in BIH.",
publisher = "Univerzitet u Novom Sadu - Tehnički fakultet Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "Bosnia and Herzegovina's metalworking industry companies barriers to export to EU market",
pages = "84-78",
number = "2",
volume = "4",
doi = "10.5937/jemc1402078S"
}

Spasojević Brkić, V., Veljković, Z., Golubović, T., Omić, S.,& Brkić, A.. (2014). Bosnia and Herzegovina's metalworking industry companies barriers to export to EU market. in Journal of Engineering Management and Competitiveness (JEMC)
Univerzitet u Novom Sadu - Tehnički fakultet Mihajlo Pupin, Zrenjanin., 4(2), 78-84.
https://doi.org/10.5937/jemc1402078S

Spasojević Brkić V, Veljković Z, Golubović T, Omić S, Brkić A. Bosnia and Herzegovina's metalworking industry companies barriers to export to EU market. in Journal of Engineering Management and Competitiveness (JEMC). 2014;4(2):78-84.
doi:10.5937/jemc1402078S .

Spasojević Brkić, Vesna, Veljković, Zorica, Golubović, Tamara, Omić, Snežana, Brkić, Aleksandar, "Bosnia and Herzegovina's metalworking industry companies barriers to export to EU market" in Journal of Engineering Management and Competitiveness (JEMC), 4, no. 2 (2014):78-84,
https://doi.org/10.5937/jemc1402078S . .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Spasojević Brkić, Vesna
AU  - Omić, Snežana
AU  - Milović, Ljubica
AU  - Sedmak, Tamara
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1607
AB  - Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.
T2  - Metalurgia International
T1  - Productivity after ownership transformation-Serbian case
EP  - 57
IS  - 6
SP  - 50
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1995
ER  - 

@article{
author = "Dondur, Nikola and Spasojević Brkić, Vesna and Omić, Snežana and Milović, Ljubica and Sedmak, Tamara",
year = "2012",
abstract = "Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.",
journal = "Metalurgia International",
title = "Productivity after ownership transformation-Serbian case",
pages = "57-50",
number = "6",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1995"
}

Dondur, N., Spasojević Brkić, V., Omić, S., Milović, L.,& Sedmak, T.. (2012). Productivity after ownership transformation-Serbian case. in Metalurgia International, 17(6), 50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995

Dondur N, Spasojević Brkić V, Omić S, Milović L, Sedmak T. Productivity after ownership transformation-Serbian case. in Metalurgia International. 2012;17(6):50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

Dondur, Nikola, Spasojević Brkić, Vesna, Omić, Snežana, Milović, Ljubica, Sedmak, Tamara, "Productivity after ownership transformation-Serbian case" in Metalurgia International, 17, no. 6 (2012):50-57,
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Đurđević, Tijana
AU  - Omić, Snežana
AU  - Klarin, Milivoj
AU  - Dondur, Nikola
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1417
AB  - Ova studija istražuje uticaj alata kvaliteta na finansijske pokazatelje, pri istraživanju na uzorku od 119 Srpskih industrijskih preduzeća. Faktorskom analizom i analizom pouzdanosti dokazano je da se alati kvaliteta mogu klasifikovati u tri primarne kategorije: alati kvaliteta za pregled trenutnih uslova (za odlučivanje), alati kvaliteta za analizu trenutnih uslova (za rešavanje problema) i alati kvaliteta za planiranje proizvodnje i kontrolu (za unapređenje). Odnosi između ove 3 grupe alata kvaliteta i finansijskih pokazatelja testirani su upotrebom 'stepwise' regresione analize. Zaključeno je da prva grupa alata kvaliteta (za odlučivanje) ima značajni uticaj na većinu dimenzija finansijskih performansi, dok druga i treća grupa nemaju statističku značajnost. Uticaj prve grupe alata kvaliteta na prihod od prodaje je sa nivoom statističke značajnosti p lt 0.01 dok je njen uticaj na profit kompanije i ukupne prihode po zaposlenom statističkog značaja p lt 0.05. Konzistencija modela je bila u rangu 4% do 7%.
AB  - This study examines the impact of quality tools on financial performances using a sample of 119 Serbian industrial firms. Factor and reliability analysis are used to show that quality tools may be classified into three primary categories: quality tools for reviewing current conditions (for decision making), quality tools for analyzing current conditions (for problems solving) and quality tools for production planning and control (for improvement). The relationships between these 3 groups of quality tools and financial performances were tested using the stepwise regression analysis. It was concluded that the first group of quality tools (quality tools for reviewing current condition, e.g. for decision making) has significant impact on most of the dimensions of financial performances, while for the second and third group there is no statistical support. Influence of the first group of quality tools on sales revenue is statistically significant at a p lt 0.01 significance level while it's influence on company profit and total revenue per employee are statistically significant at p lt 0.05 significance level. The model ranged from 4% to 7%.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Serbian Journal of Management
T1  - Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije
T1  - An empirical examination of quality tools impact on financial performances: Evidence from Serbia
EP  - 87
IS  - 1
SP  - 77
VL  - 7
DO  - 10.5937/sjm1201077S
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Đurđević, Tijana and Omić, Snežana and Klarin, Milivoj and Dondur, Nikola",
year = "2012",
abstract = "Ova studija istražuje uticaj alata kvaliteta na finansijske pokazatelje, pri istraživanju na uzorku od 119 Srpskih industrijskih preduzeća. Faktorskom analizom i analizom pouzdanosti dokazano je da se alati kvaliteta mogu klasifikovati u tri primarne kategorije: alati kvaliteta za pregled trenutnih uslova (za odlučivanje), alati kvaliteta za analizu trenutnih uslova (za rešavanje problema) i alati kvaliteta za planiranje proizvodnje i kontrolu (za unapređenje). Odnosi između ove 3 grupe alata kvaliteta i finansijskih pokazatelja testirani su upotrebom 'stepwise' regresione analize. Zaključeno je da prva grupa alata kvaliteta (za odlučivanje) ima značajni uticaj na većinu dimenzija finansijskih performansi, dok druga i treća grupa nemaju statističku značajnost. Uticaj prve grupe alata kvaliteta na prihod od prodaje je sa nivoom statističke značajnosti p lt 0.01 dok je njen uticaj na profit kompanije i ukupne prihode po zaposlenom statističkog značaja p lt 0.05. Konzistencija modela je bila u rangu 4% do 7%., This study examines the impact of quality tools on financial performances using a sample of 119 Serbian industrial firms. Factor and reliability analysis are used to show that quality tools may be classified into three primary categories: quality tools for reviewing current conditions (for decision making), quality tools for analyzing current conditions (for problems solving) and quality tools for production planning and control (for improvement). The relationships between these 3 groups of quality tools and financial performances were tested using the stepwise regression analysis. It was concluded that the first group of quality tools (quality tools for reviewing current condition, e.g. for decision making) has significant impact on most of the dimensions of financial performances, while for the second and third group there is no statistical support. Influence of the first group of quality tools on sales revenue is statistically significant at a p lt 0.01 significance level while it's influence on company profit and total revenue per employee are statistically significant at p lt 0.05 significance level. The model ranged from 4% to 7%.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Serbian Journal of Management",
title = "Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije, An empirical examination of quality tools impact on financial performances: Evidence from Serbia",
pages = "87-77",
number = "1",
volume = "7",
doi = "10.5937/sjm1201077S"
}

Spasojević Brkić, V., Đurđević, T., Omić, S., Klarin, M.,& Dondur, N.. (2012). Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije. in Serbian Journal of Management
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 7(1), 77-87.
https://doi.org/10.5937/sjm1201077S

Spasojević Brkić V, Đurđević T, Omić S, Klarin M, Dondur N. Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije. in Serbian Journal of Management. 2012;7(1):77-87.
doi:10.5937/sjm1201077S .

Spasojević Brkić, Vesna, Đurđević, Tijana, Omić, Snežana, Klarin, Milivoj, Dondur, Nikola, "Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije" in Serbian Journal of Management, 7, no. 1 (2012):77-87,
https://doi.org/10.5937/sjm1201077S . .

TY  - JOUR
AU  - Dobrojević, Miloš
AU  - Rakin, Marko
AU  - Međo, Bojan
AU  - Omić, Snežana
AU  - Sedmak, Aleksandar
PY  - 2010
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/993
AB  - U radu je dat pregled razvoja novog softvera za upravljanje projektima, namenjenog prvenstveno korišćenju u industriji. Osnovni cilj ovog rešenja je da olakša i pojednostavi menadžment informacija i dokumenata u svakodnevnoj inženjerskoj praksi u različitim granama industrije, a prevashodno u firmama koje posluju na više lokacija. Posebna pažnja je posvećena razvoju odgovarajućih rešenja za praćenje, čuvanje i analizu informacija o projektu, kao i pravovremenom dostavljanju tih informacija članovima tima ili drugim odgovornim licima. Novi softver je baziran na Internet komunikaciji i koristi LAMP/WAMP platformu (Linux / Windows, Apache, MySQL, PHP), zbog njene stabilnosti, rasprostranjenosti, cene i jednostavnog održavanja. Modularna struktura softvera omogućuje lako prilagođavanje potrebama firme-korisnika, uz veoma kratak period uvođenja. Njegove glavne prednosti su jednostavno korišćenje, brza implementacija, jednostavno održavanje sistema, brza obuka uz minimalno predznanje korisnika o radu na računaru.
AB  - An efficient way to collect, analyze and transfer the project information, as well as tracking and coordination of information exchange are crucial for successful project finalization in industrial companies. Project members and teams have to be able to communicate the status of on-going project or projects, and a proper software solution can greatly improve the management of information among them. An overview is given on the development of a new software solution for project management, mainly for use in industrial environment. The main concern is application in everyday engineering practice in various, mainly distributed companies. Having this in mind, special care has been devoted to development of appropriate tools for tracking, storing and analysis of the information about the project, and in time delivering to the right team members or other responsible persons. The proposed project management solution is Internet-based and uses LAMP/WAMP (Linux or Windows - Apache - MySQL - PHP) platform. Main advantages of this software are simple usage, quick implementation, easy system maintenance, short training and only basic computer skills required from operators.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Internet aplikacija za upravljanje projektima u industrijskim sistemima
T1  - Internet application for project management in industrial systems
EP  - 82
IS  - 2
SP  - 73
VL  - 8
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1640
ER  - 

@article{
author = "Dobrojević, Miloš and Rakin, Marko and Međo, Bojan and Omić, Snežana and Sedmak, Aleksandar",
year = "2010",
abstract = "U radu je dat pregled razvoja novog softvera za upravljanje projektima, namenjenog prvenstveno korišćenju u industriji. Osnovni cilj ovog rešenja je da olakša i pojednostavi menadžment informacija i dokumenata u svakodnevnoj inženjerskoj praksi u različitim granama industrije, a prevashodno u firmama koje posluju na više lokacija. Posebna pažnja je posvećena razvoju odgovarajućih rešenja za praćenje, čuvanje i analizu informacija o projektu, kao i pravovremenom dostavljanju tih informacija članovima tima ili drugim odgovornim licima. Novi softver je baziran na Internet komunikaciji i koristi LAMP/WAMP platformu (Linux / Windows, Apache, MySQL, PHP), zbog njene stabilnosti, rasprostranjenosti, cene i jednostavnog održavanja. Modularna struktura softvera omogućuje lako prilagođavanje potrebama firme-korisnika, uz veoma kratak period uvođenja. Njegove glavne prednosti su jednostavno korišćenje, brza implementacija, jednostavno održavanje sistema, brza obuka uz minimalno predznanje korisnika o radu na računaru., An efficient way to collect, analyze and transfer the project information, as well as tracking and coordination of information exchange are crucial for successful project finalization in industrial companies. Project members and teams have to be able to communicate the status of on-going project or projects, and a proper software solution can greatly improve the management of information among them. An overview is given on the development of a new software solution for project management, mainly for use in industrial environment. The main concern is application in everyday engineering practice in various, mainly distributed companies. Having this in mind, special care has been devoted to development of appropriate tools for tracking, storing and analysis of the information about the project, and in time delivering to the right team members or other responsible persons. The proposed project management solution is Internet-based and uses LAMP/WAMP (Linux or Windows - Apache - MySQL - PHP) platform. Main advantages of this software are simple usage, quick implementation, easy system maintenance, short training and only basic computer skills required from operators.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Internet aplikacija za upravljanje projektima u industrijskim sistemima, Internet application for project management in industrial systems",
pages = "82-73",
number = "2",
volume = "8",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1640"
}

Dobrojević, M., Rakin, M., Međo, B., Omić, S.,& Sedmak, A.. (2010). Internet aplikacija za upravljanje projektima u industrijskim sistemima. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 8(2), 73-82.
https://hdl.handle.net/21.15107/rcub_technorep_1640

Dobrojević M, Rakin M, Međo B, Omić S, Sedmak A. Internet aplikacija za upravljanje projektima u industrijskim sistemima. in Journal of Applied Engineering Science. 2010;8(2):73-82.
https://hdl.handle.net/21.15107/rcub_technorep_1640 .

Dobrojević, Miloš, Rakin, Marko, Međo, Bojan, Omić, Snežana, Sedmak, Aleksandar, "Internet aplikacija za upravljanje projektima u industrijskim sistemima" in Journal of Applied Engineering Science, 8, no. 2 (2010):73-82,
https://hdl.handle.net/21.15107/rcub_technorep_1640 .