TY  - CONF
AU  - Milošević, Miloš
AU  - Trajković, Isaak
AU  - Ivanov, Toni
AU  - Popović, Mihajlo
AU  - Mitrović, Nenad
AU  - Milovanović, Aleksa
AU  - Jovanović Saković, Jelena
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7361
AB  - After noting that head and neck injuries are very common in martial arts sports, a growing need for developing
helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also
problems in terms of developing the material from which the helmets are made. In terms of design, the helmet
must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material
development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is
made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing
models and materials of helmets, there was a need for research in which the development of experimental
settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to
make an experimental setup to enable testing of helmets from different manufacturers as well as testing of
newer generation helmets. This paper presents a conceptual solution of an experimental setup in which
impacts are simulated in controlled conditions, taking into account that the impact image applied to the head
model is controlled, so that it is possible to simulate different types of impacts while maintaining the same
boundary conditions.
C3  - International conference of experimental and numerical investigations and new technologies (2020 ; Zlatibor)
T1  - Development of conceptual solution of experimental setting for controlled application of impact force on the head model using DIC
SP  - 30
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7361
ER  - 

@conference{
author = "Milošević, Miloš and Trajković, Isaak and Ivanov, Toni and Popović, Mihajlo and Mitrović, Nenad and Milovanović, Aleksa and Jovanović Saković, Jelena",
year = "2020",
abstract = "After noting that head and neck injuries are very common in martial arts sports, a growing need for developing
helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also
problems in terms of developing the material from which the helmets are made. In terms of design, the helmet
must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material
development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is
made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing
models and materials of helmets, there was a need for research in which the development of experimental
settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to
make an experimental setup to enable testing of helmets from different manufacturers as well as testing of
newer generation helmets. This paper presents a conceptual solution of an experimental setup in which
impacts are simulated in controlled conditions, taking into account that the impact image applied to the head
model is controlled, so that it is possible to simulate different types of impacts while maintaining the same
boundary conditions.",
journal = "International conference of experimental and numerical investigations and new technologies (2020 ; Zlatibor)",
title = "Development of conceptual solution of experimental setting for controlled application of impact force on the head model using DIC",
pages = "30",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7361"
}

Milošević, M., Trajković, I., Ivanov, T., Popović, M., Mitrović, N., Milovanović, A.,& Jovanović Saković, J.. (2020). Development of conceptual solution of experimental setting for controlled application of impact force on the head model using DIC. in International conference of experimental and numerical investigations and new technologies (2020 ; Zlatibor), 30.
https://hdl.handle.net/21.15107/rcub_machinery_7361

Milošević M, Trajković I, Ivanov T, Popović M, Mitrović N, Milovanović A, Jovanović Saković J. Development of conceptual solution of experimental setting for controlled application of impact force on the head model using DIC. in International conference of experimental and numerical investigations and new technologies (2020 ; Zlatibor). 2020;:30.
https://hdl.handle.net/21.15107/rcub_machinery_7361 .

Milošević, Miloš, Trajković, Isaak, Ivanov, Toni, Popović, Mihajlo, Mitrović, Nenad, Milovanović, Aleksa, Jovanović Saković, Jelena, "Development of conceptual solution of experimental setting for controlled application of impact force on the head model using DIC" in International conference of experimental and numerical investigations and new technologies (2020 ; Zlatibor) (2020):30,
https://hdl.handle.net/21.15107/rcub_machinery_7361 .

TY  - CONF
AU  - Milošević, Miloš
AU  - Trajković, Isaak
AU  - Ivanov, Toni
AU  - Popović, Mihajlo
AU  - Mitrović, Nenad
AU  - Milovanović, Aleksa
AU  - Jovanović-Saković, Jelena
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6085
AB  - After noting that head and neck injuries are very common in martial arts sports, a growing need for developing helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also problems in terms of developing the material from which the helmets are made. In terms of design, the helmet must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing models and materials of helmets, there was a need for research in which the development of experimental settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to make an experimental setup to enable testing of helmets from different manufacturers as well as testing of newer generation helmets. This paper presents a conceptual solution of an experimental setup in which impacts are simulated in controlled conditions, taking into account that the impact image applied to the head model is controlled, so that it is possible to simulate different types of impacts while maintaining the same boundary conditions.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020
T1  - Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC
EP  - 30
SP  - 30
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6085
ER  - 

@conference{
author = "Milošević, Miloš and Trajković, Isaak and Ivanov, Toni and Popović, Mihajlo and Mitrović, Nenad and Milovanović, Aleksa and Jovanović-Saković, Jelena",
year = "2020",
abstract = "After noting that head and neck injuries are very common in martial arts sports, a growing need for developing helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also problems in terms of developing the material from which the helmets are made. In terms of design, the helmet must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing models and materials of helmets, there was a need for research in which the development of experimental settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to make an experimental setup to enable testing of helmets from different manufacturers as well as testing of newer generation helmets. This paper presents a conceptual solution of an experimental setup in which impacts are simulated in controlled conditions, taking into account that the impact image applied to the head model is controlled, so that it is possible to simulate different types of impacts while maintaining the same boundary conditions.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020",
title = "Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC",
pages = "30-30",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6085"
}

Milošević, M., Trajković, I., Ivanov, T., Popović, M., Mitrović, N., Milovanović, A.,& Jovanović-Saković, J.. (2020). Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC. in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 30-30.
https://hdl.handle.net/21.15107/rcub_machinery_6085

Milošević M, Trajković I, Ivanov T, Popović M, Mitrović N, Milovanović A, Jovanović-Saković J. Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC. in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020. 2020;:30-30.
https://hdl.handle.net/21.15107/rcub_machinery_6085 .

Milošević, Miloš, Trajković, Isaak, Ivanov, Toni, Popović, Mihajlo, Mitrović, Nenad, Milovanović, Aleksa, Jovanović-Saković, Jelena, "Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC" in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020 (2020):30-30,
https://hdl.handle.net/21.15107/rcub_machinery_6085 .