TY  - JOUR
AU  - Pjević, Miloš
AU  - Puzović, Mihajlo
AU  - Tanović, Ljubodrag
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5568
AB  - The parts obtained by sheet metal forming technology can be classified as a percentage in the most common parts of assemblies and sub-mechanisms of mechanisms. The basic problem that occurs when making sheet metal parts using bending process, is the elastic return. The elastic return coefficient that can be used as a correction coefficient in the bending process is necessary to be determine for the used material, as well as for the processing conditions. All this led to high cost of the processing tool. On the other hand, rapid tooling constantly increasing its present in the processing presses. One of the biggest advantages of the rapid tooling is reduction of the cost and processing time of the final product. In this paper, the experimental identification of the elastic return coefficient for three different materials (Al-alloy, non-alloy steel and stainless steel) was performed, as well applicability of rapid tooling on sheet metal bending. The experiments covered a range of bending angles from 65° to 135°. It has been found that depending on the type of material and the bending angle, the elastic return coefficient can vary considerably. It also turned out that its value is significantly influenced by the geometry of the punch. All elements made using additive technology, successfully performed work tasks without the occurrence of destruction
PB  - University of Novi Sad, faculty of Technical Sciences, Department for Production Engineering
T2  - ADVANCED TECHNOLOGIES AND MATERIALS
T1  - Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling
EP  - 40
SP  - 35
DO  - 10.24867/ATM-2020-1-005
ER  - 

@article{
author = "Pjević, Miloš and Puzović, Mihajlo and Tanović, Ljubodrag",
year = "2020",
abstract = "The parts obtained by sheet metal forming technology can be classified as a percentage in the most common parts of assemblies and sub-mechanisms of mechanisms. The basic problem that occurs when making sheet metal parts using bending process, is the elastic return. The elastic return coefficient that can be used as a correction coefficient in the bending process is necessary to be determine for the used material, as well as for the processing conditions. All this led to high cost of the processing tool. On the other hand, rapid tooling constantly increasing its present in the processing presses. One of the biggest advantages of the rapid tooling is reduction of the cost and processing time of the final product. In this paper, the experimental identification of the elastic return coefficient for three different materials (Al-alloy, non-alloy steel and stainless steel) was performed, as well applicability of rapid tooling on sheet metal bending. The experiments covered a range of bending angles from 65° to 135°. It has been found that depending on the type of material and the bending angle, the elastic return coefficient can vary considerably. It also turned out that its value is significantly influenced by the geometry of the punch. All elements made using additive technology, successfully performed work tasks without the occurrence of destruction",
publisher = "University of Novi Sad, faculty of Technical Sciences, Department for Production Engineering",
journal = "ADVANCED TECHNOLOGIES AND MATERIALS",
title = "Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling",
pages = "40-35",
doi = "10.24867/ATM-2020-1-005"
}

Pjević, M., Puzović, M.,& Tanović, L.. (2020). Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling. in ADVANCED TECHNOLOGIES AND MATERIALS
University of Novi Sad, faculty of Technical Sciences, Department for Production Engineering., 35-40.
https://doi.org/10.24867/ATM-2020-1-005

Pjević M, Puzović M, Tanović L. Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling. in ADVANCED TECHNOLOGIES AND MATERIALS. 2020;:35-40.
doi:10.24867/ATM-2020-1-005 .

Pjević, Miloš, Puzović, Mihajlo, Tanović, Ljubodrag, "Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling" in ADVANCED TECHNOLOGIES AND MATERIALS (2020):35-40,
https://doi.org/10.24867/ATM-2020-1-005 . .