TY  - CONF
AU  - Kosić, Boris
AU  - Jeli, Zorana
AU  - Stakić, Aleksandra
AU  - Rusov, Marko
AU  - Bekrić, Dragoljub
AU  - Trišović, Zaga
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7680
AB  - Compliant mechanisms have several advantages and disadvantages compared to classical mechanisms, primarily because those mechanisms are essentially one part that doesn't require any lubrication and there is also no backslash between movable parts. But due to the mechanism design principles, the strength of the overall structure and movement range can be significantly limited.
PB  - Serbian Society for Geometry and Graphics (SUGIG)
C3  - The 9th International Scientific Conference on Geometry and Graphics MoNGeometrija 2023 June 7-10 Novi Sad, Serbia
T1  - ANALISYS OF A FOUR-BAR LINKAGE COMPLAINT MECHANISM FOR RECEIVING APPROXIMATELY STRAIGHT-LINE MOTION
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7680
ER  - 

@conference{
author = "Kosić, Boris and Jeli, Zorana and Stakić, Aleksandra and Rusov, Marko and Bekrić, Dragoljub and Trišović, Zaga",
year = "2023",
abstract = "Compliant mechanisms have several advantages and disadvantages compared to classical mechanisms, primarily because those mechanisms are essentially one part that doesn't require any lubrication and there is also no backslash between movable parts. But due to the mechanism design principles, the strength of the overall structure and movement range can be significantly limited.",
publisher = "Serbian Society for Geometry and Graphics (SUGIG)",
journal = "The 9th International Scientific Conference on Geometry and Graphics MoNGeometrija 2023 June 7-10 Novi Sad, Serbia",
title = "ANALISYS OF A FOUR-BAR LINKAGE COMPLAINT MECHANISM FOR RECEIVING APPROXIMATELY STRAIGHT-LINE MOTION",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7680"
}

Kosić, B., Jeli, Z., Stakić, A., Rusov, M., Bekrić, D.,& Trišović, Z.. (2023). ANALISYS OF A FOUR-BAR LINKAGE COMPLAINT MECHANISM FOR RECEIVING APPROXIMATELY STRAIGHT-LINE MOTION. in The 9th International Scientific Conference on Geometry and Graphics MoNGeometrija 2023 June 7-10 Novi Sad, Serbia
Serbian Society for Geometry and Graphics (SUGIG)..
https://hdl.handle.net/21.15107/rcub_machinery_7680

Kosić B, Jeli Z, Stakić A, Rusov M, Bekrić D, Trišović Z. ANALISYS OF A FOUR-BAR LINKAGE COMPLAINT MECHANISM FOR RECEIVING APPROXIMATELY STRAIGHT-LINE MOTION. in The 9th International Scientific Conference on Geometry and Graphics MoNGeometrija 2023 June 7-10 Novi Sad, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7680 .

Kosić, Boris, Jeli, Zorana, Stakić, Aleksandra, Rusov, Marko, Bekrić, Dragoljub, Trišović, Zaga, "ANALISYS OF A FOUR-BAR LINKAGE COMPLAINT MECHANISM FOR RECEIVING APPROXIMATELY STRAIGHT-LINE MOTION" in The 9th International Scientific Conference on Geometry and Graphics MoNGeometrija 2023 June 7-10 Novi Sad, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7680 .

TY  - CONF
AU  - Trišović, Nataša
AU  - Li, Wei
AU  - Gavrilović, Marko
AU  - Baneasa Birtok, Corneliu
AU  - Ristić, Ognjen
AU  - Milić, Milica
AU  - Radulovic, Radoslav
AU  - Trišović, Zaga
AU  - Socalici, Ana Virginia
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7739
PB  - Academy of Applied Technical Studies Belgrade
C3  - International scientific and professional conference: "Politehnika 2023"
T1  - Effects of changing design parameters
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7739
ER  - 

@conference{
author = "Trišović, Nataša and Li, Wei and Gavrilović, Marko and Baneasa Birtok, Corneliu and Ristić, Ognjen and Milić, Milica and Radulovic, Radoslav and Trišović, Zaga and Socalici, Ana Virginia",
year = "2023",
publisher = "Academy of Applied Technical Studies Belgrade",
journal = "International scientific and professional conference: "Politehnika 2023"",
title = "Effects of changing design parameters",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7739"
}

Trišović, N., Li, W., Gavrilović, M., Baneasa Birtok, C., Ristić, O., Milić, M., Radulovic, R., Trišović, Z.,& Socalici, A. V.. (2023). Effects of changing design parameters. in International scientific and professional conference: "Politehnika 2023"
Academy of Applied Technical Studies Belgrade..
https://hdl.handle.net/21.15107/rcub_machinery_7739

Trišović N, Li W, Gavrilović M, Baneasa Birtok C, Ristić O, Milić M, Radulovic R, Trišović Z, Socalici AV. Effects of changing design parameters. in International scientific and professional conference: "Politehnika 2023". 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7739 .

Trišović, Nataša, Li, Wei, Gavrilović, Marko, Baneasa Birtok, Corneliu, Ristić, Ognjen, Milić, Milica, Radulovic, Radoslav, Trišović, Zaga, Socalici, Ana Virginia, "Effects of changing design parameters" in International scientific and professional conference: "Politehnika 2023" (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7739 .

TY  - CONF
AU  - Trišović, Zaga
AU  - Lazović, Tatjana
AU  - Trišović, Nataša
AU  - Ljubojević, Pavle
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6869
AB  - The modern era of composite materials begins at the end of the 19th century with the production of the first polymer–based artificial resins. Since then, the types and technologies of composite materials have been continuously developed and improved, until today. Their use in modern industry is progressively growing. That is why orderliness and regularity are necessary for the development, production, meeting of market requirements, exploitation and recycling of these materials. It can only be achieved through standards and standardization. Within the technical
committee TC 61 of the International Organization for Standardization – ISO, the subcommittee ISO/TC 61/SC 13, which deals with composites and reinforcing fibres, operates. The American Society for Testing and Materials – ASTM International also publishes international standards. The D30 committee for composite materials operates within this organization. ISO/TC 61/SC 13 has existed since 1985, and ASTM/D30 since 1964. In this paper, an analysis of the number, types and dynamics of the publication of standards in the field of composites and related fields was carried
out. Based on the analysis carried out, it was concluded that a large number of significant standards have been published, that the number of standards is increasing following the development of new composite materials, as well as that further expansion of the concept of standardization in the field of composites can be expected. The results shown here are the result of research supported by COST action CA21155 – Advanced Composites under HIgh STRAin RaTEs Loading: a route to certification–by–analysis (HISTRATE).
PB  - University Politehnica Timișoara
C3  - International Conference on Applied Sciences - ICAS 2023, Short Abstracts
T1  - Standardization in the field of composites
EP  - 44
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6869
ER  - 

@conference{
author = "Trišović, Zaga and Lazović, Tatjana and Trišović, Nataša and Ljubojević, Pavle",
year = "2023",
abstract = "The modern era of composite materials begins at the end of the 19th century with the production of the first polymer–based artificial resins. Since then, the types and technologies of composite materials have been continuously developed and improved, until today. Their use in modern industry is progressively growing. That is why orderliness and regularity are necessary for the development, production, meeting of market requirements, exploitation and recycling of these materials. It can only be achieved through standards and standardization. Within the technical
committee TC 61 of the International Organization for Standardization – ISO, the subcommittee ISO/TC 61/SC 13, which deals with composites and reinforcing fibres, operates. The American Society for Testing and Materials – ASTM International also publishes international standards. The D30 committee for composite materials operates within this organization. ISO/TC 61/SC 13 has existed since 1985, and ASTM/D30 since 1964. In this paper, an analysis of the number, types and dynamics of the publication of standards in the field of composites and related fields was carried
out. Based on the analysis carried out, it was concluded that a large number of significant standards have been published, that the number of standards is increasing following the development of new composite materials, as well as that further expansion of the concept of standardization in the field of composites can be expected. The results shown here are the result of research supported by COST action CA21155 – Advanced Composites under HIgh STRAin RaTEs Loading: a route to certification–by–analysis (HISTRATE).",
publisher = "University Politehnica Timișoara",
journal = "International Conference on Applied Sciences - ICAS 2023, Short Abstracts",
title = "Standardization in the field of composites",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6869"
}

Trišović, Z., Lazović, T., Trišović, N.,& Ljubojević, P.. (2023). Standardization in the field of composites. in International Conference on Applied Sciences - ICAS 2023, Short Abstracts
University Politehnica Timișoara., 44-44.
https://hdl.handle.net/21.15107/rcub_machinery_6869

Trišović Z, Lazović T, Trišović N, Ljubojević P. Standardization in the field of composites. in International Conference on Applied Sciences - ICAS 2023, Short Abstracts. 2023;:44-44.
https://hdl.handle.net/21.15107/rcub_machinery_6869 .

Trišović, Zaga, Lazović, Tatjana, Trišović, Nataša, Ljubojević, Pavle, "Standardization in the field of composites" in International Conference on Applied Sciences - ICAS 2023, Short Abstracts (2023):44-44,
https://hdl.handle.net/21.15107/rcub_machinery_6869 .

TY  - CONF
AU  - Trišović, Zaga
AU  - Lazović-Kapor, Tatjana
AU  - Socalici, Ana Virginia
AU  - Jeli, Zorana
AU  - Trišović, Tomislav
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7185
AB  - Filtration and sorption are vital techniques in water purification,
effectively eliminating impurities and microorganisms from the water.
PB  - Trans Tech Publications
C3  - 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
T1  - Innovations in Water Treatment
EP  - 112
SP  - 112
VL  - 2
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7185
ER  - 

@conference{
author = "Trišović, Zaga and Lazović-Kapor, Tatjana and Socalici, Ana Virginia and Jeli, Zorana and Trišović, Tomislav",
year = "2023",
abstract = "Filtration and sorption are vital techniques in water purification,
effectively eliminating impurities and microorganisms from the water.",
publisher = "Trans Tech Publications",
journal = "9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland",
title = "Innovations in Water Treatment",
pages = "112-112",
volume = "2",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7185"
}

Trišović, Z., Lazović-Kapor, T., Socalici, A. V., Jeli, Z.,& Trišović, T.. (2023). Innovations in Water Treatment. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
Trans Tech Publications., 2, 112-112.
https://hdl.handle.net/21.15107/rcub_machinery_7185

Trišović Z, Lazović-Kapor T, Socalici AV, Jeli Z, Trišović T. Innovations in Water Treatment. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland. 2023;2:112-112.
https://hdl.handle.net/21.15107/rcub_machinery_7185 .

Trišović, Zaga, Lazović-Kapor, Tatjana, Socalici, Ana Virginia, Jeli, Zorana, Trišović, Tomislav, "Innovations in Water Treatment" in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland, 2 (2023):112-112,
https://hdl.handle.net/21.15107/rcub_machinery_7185 .

TY  - CONF
AU  - Trišović, Zaga
AU  - Trišović, Tomislav
AU  - Socalici, Ana Virginia
AU  - Jeli, Zorana
AU  - Baneasa Birtok, Corneliu
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7184
AB  - For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements.
PB  - 2023 Trans Tech Publications Ltd, Switzerland, editors: Mihály Csüllög and Dr. Tamas Mankovits
C3  - 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
T1  - Innovations in Wastewater Treatment
EP  - 115
IS  - 115
VL  - Scientific Books of Abstracts, Vol. 2, pp 115-115
VL  - 2
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7184
ER  - 

@conference{
author = "Trišović, Zaga and Trišović, Tomislav and Socalici, Ana Virginia and Jeli, Zorana and Baneasa Birtok, Corneliu",
year = "2023",
abstract = "For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements.",
publisher = "2023 Trans Tech Publications Ltd, Switzerland, editors: Mihály Csüllög and Dr. Tamas Mankovits",
journal = "9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland",
title = "Innovations in Wastewater Treatment",
pages = "115",
number = "115",
volume = "Scientific Books of Abstracts, Vol. 2, pp 115-115, 2",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7184"
}

Trišović, Z., Trišović, T., Socalici, A. V., Jeli, Z.,& Baneasa Birtok, C.. (2023). Innovations in Wastewater Treatment. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
2023 Trans Tech Publications Ltd, Switzerland, editors: Mihály Csüllög and Dr. Tamas Mankovits., Scientific Books of Abstracts, Vol. 2, pp 115-115(115).
https://hdl.handle.net/21.15107/rcub_machinery_7184

Trišović Z, Trišović T, Socalici AV, Jeli Z, Baneasa Birtok C. Innovations in Wastewater Treatment. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland. 2023;Scientific Books of Abstracts, Vol. 2, pp 115-115(115):null-115.
https://hdl.handle.net/21.15107/rcub_machinery_7184 .

Trišović, Zaga, Trišović, Tomislav, Socalici, Ana Virginia, Jeli, Zorana, Baneasa Birtok, Corneliu, "Innovations in Wastewater Treatment" in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland, Scientific Books of Abstracts, Vol. 2, pp 115-115, no. 115 (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7184 .

TY  - CONF
AU  - Trišović, Nataša
AU  - Petrović, Ana
AU  - Trišović, Zaga
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6003
AB  - The possibilities of testing real systems are often limited, especially in case of large
constructions. One of the solutions is to create a sub-scaled model to predict elaborate the
behavior of the actual construction. In most cases, testing on the model instead of the actual
construction results in a great saving of requisite resources.
The laws of similitude and scaling are well-known and confirmed for cases of simple
structures. In principle, if a model is 10 times smaller (in dimensions and plate thicknesses)
than the real structure, its eigenvalue frequencies are expected to be 10 times larger than the
frequencies of the real structure. In this paper will be shown that laws of scaling can be
applied on dynamic testing of a complex structure.
As a test example, the construction of the substructure, the slewing platform and the lower
part of the pylons of the bucket wheel excavator Sch Rs 630 is considered. Note that, these are
dynamically loaded machines and dynamic calculation is significant from the aspects of
identifying dynamic behavior. Secondly, strength of the supporting structure is of critical
importance for proper functioning of these machines. Dynamic calculation yields results in
identifying weak construction spots, because the dynamic behavior reveals how the
construction would react under some hypothetical load of arbitrary direction.
Numerical calculations of the real construction and sub-scaled model are performed using
Finite Element Method. Eigenvalue frequencies of the real construction and model are
obtained in correlation as expected. In this manner scaling laws are confirmed for this
structure and similar structures. Physical model of this construction is made (from the same
material as the real structure). Static experiments on physical model validated numerical
models (of the real structure and its sub-scaled model) and confirmed that 10 times reduction
of dimensions and thicknesses is justified. Thus, the physical model represents the real
structure and is suitable for further dynamic testing in the laboratory.
C3  - International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy
T1  - Dynamic model of bucket wheel excavator substructures, validation of scaling laws
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6003
ER  - 

@conference{
author = "Trišović, Nataša and Petrović, Ana and Trišović, Zaga",
year = "2019",
abstract = "The possibilities of testing real systems are often limited, especially in case of large
constructions. One of the solutions is to create a sub-scaled model to predict elaborate the
behavior of the actual construction. In most cases, testing on the model instead of the actual
construction results in a great saving of requisite resources.
The laws of similitude and scaling are well-known and confirmed for cases of simple
structures. In principle, if a model is 10 times smaller (in dimensions and plate thicknesses)
than the real structure, its eigenvalue frequencies are expected to be 10 times larger than the
frequencies of the real structure. In this paper will be shown that laws of scaling can be
applied on dynamic testing of a complex structure.
As a test example, the construction of the substructure, the slewing platform and the lower
part of the pylons of the bucket wheel excavator Sch Rs 630 is considered. Note that, these are
dynamically loaded machines and dynamic calculation is significant from the aspects of
identifying dynamic behavior. Secondly, strength of the supporting structure is of critical
importance for proper functioning of these machines. Dynamic calculation yields results in
identifying weak construction spots, because the dynamic behavior reveals how the
construction would react under some hypothetical load of arbitrary direction.
Numerical calculations of the real construction and sub-scaled model are performed using
Finite Element Method. Eigenvalue frequencies of the real construction and model are
obtained in correlation as expected. In this manner scaling laws are confirmed for this
structure and similar structures. Physical model of this construction is made (from the same
material as the real structure). Static experiments on physical model validated numerical
models (of the real structure and its sub-scaled model) and confirmed that 10 times reduction
of dimensions and thicknesses is justified. Thus, the physical model represents the real
structure and is suitable for further dynamic testing in the laboratory.",
journal = "International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy",
title = "Dynamic model of bucket wheel excavator substructures, validation of scaling laws",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6003"
}

Trišović, N., Petrović, A.,& Trišović, Z.. (2019). Dynamic model of bucket wheel excavator substructures, validation of scaling laws. in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy.
https://hdl.handle.net/21.15107/rcub_machinery_6003

Trišović N, Petrović A, Trišović Z. Dynamic model of bucket wheel excavator substructures, validation of scaling laws. in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy. 2019;.
https://hdl.handle.net/21.15107/rcub_machinery_6003 .

Trišović, Nataša, Petrović, Ana, Trišović, Zaga, "Dynamic model of bucket wheel excavator substructures, validation of scaling laws" in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy (2019),
https://hdl.handle.net/21.15107/rcub_machinery_6003 .

TY  - CONF
AU  - Trišović, Nataša
AU  - Misita, Mirjana
AU  - Li, Wei
AU  - Petrović, Ana
AU  - Trišović, Zaga
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5983
AB  - The methods of structural dynamic modification, especially those with their roots in finite
element models, have often been described as reanalysis. The paper will discuss the introducing
of a probabilistic treatment of important problem parameters. Based on the investigation
performed in the [26], further research included the execution of simulations kinetic and potential
energy, growth rates Ek and Ep, differences in growth rates, first frequency in a cantilever beam
and a modified beam for 1000 values of Young’s modulus of elasticity according to the Gaussian
distribution.
C3  - Proceedings of the 7th International Congress of Serbian Society of Mechanics
T1  - Probabilistic approach in the dynamic reanalysis
IS  - S4e
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5983
ER  - 

@conference{
author = "Trišović, Nataša and Misita, Mirjana and Li, Wei and Petrović, Ana and Trišović, Zaga",
year = "2019",
abstract = "The methods of structural dynamic modification, especially those with their roots in finite
element models, have often been described as reanalysis. The paper will discuss the introducing
of a probabilistic treatment of important problem parameters. Based on the investigation
performed in the [26], further research included the execution of simulations kinetic and potential
energy, growth rates Ek and Ep, differences in growth rates, first frequency in a cantilever beam
and a modified beam for 1000 values of Young’s modulus of elasticity according to the Gaussian
distribution.",
journal = "Proceedings of the 7th International Congress of Serbian Society of Mechanics",
title = "Probabilistic approach in the dynamic reanalysis",
number = "S4e",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5983"
}

Trišović, N., Misita, M., Li, W., Petrović, A.,& Trišović, Z.. (2019). Probabilistic approach in the dynamic reanalysis. in Proceedings of the 7th International Congress of Serbian Society of Mechanics(S4e).
https://hdl.handle.net/21.15107/rcub_machinery_5983

Trišović N, Misita M, Li W, Petrović A, Trišović Z. Probabilistic approach in the dynamic reanalysis. in Proceedings of the 7th International Congress of Serbian Society of Mechanics. 2019;(S4e).
https://hdl.handle.net/21.15107/rcub_machinery_5983 .

Trišović, Nataša, Misita, Mirjana, Li, Wei, Petrović, Ana, Trišović, Zaga, "Probabilistic approach in the dynamic reanalysis" in Proceedings of the 7th International Congress of Serbian Society of Mechanics, no. S4e (2019),
https://hdl.handle.net/21.15107/rcub_machinery_5983 .